Konica compatable RFIDeas card readers

[radd]

radd, good to know you're ahead. We have invested some time trying to help you, hope you will do that for someone else. That's the way it's for me. But i guess you exceeded expectations mate, well done.

Just don't bother guys too much and you will learn a lot.

Will do, glad to help anyone in an way I can, no exceptions


Hopefully the thread itself can help someone



Thanks again for all your help

[radd]

Soft switch 25 change it to B0 for latest function level.
Also the ldd drivers are for the au-205h which is the only model for the 8 series listed by KM.

Does set:

Soft switch 25 to B0

apply on the C754e also?


Thanks

Also the GW1-01 worked on the C754e

[srvctec]

Does set:

Soft switch 25 to B0

apply on the C754e also?


Thanks

No, it's totally different.

[tsbservice]

Does set:

Soft switch 25 to B0

apply on the C754e also?


Thanks

Also the GW1-01 worked on the C754e

FW always should come with few pages doc/pdf description. It's in there. Read that carefully before put firmware on machine. Should save much of wandering and oddballs. I know i know YouTube will skip reading part but it is really important.

[Phil B.]

FW always should come with few pages doc/pdf description. It's in there. Read that carefully before put firmware on machine. Should save much of wandering and oddballs. I know i know YouTube will skip reading part but it is really important.

IMHO YouTube is as worthless as BSM2.


READ and LEARN! it'll do you good.

[radd]

Thanks guys, so much to learn



So soft switch 25 at 60

is correct for the C754e ?

[diedux]

I will try the upgrade to G00-X4 as I understand that is better for Papercut?

Hi,
Side note.

Witch firmware is best for your print management solution you can check at bEST.
Here's the link:
Authorized Solutions | Konica Minolta bEST Technology Suite

Special for PaperCut:
Authorized Solutions | Konica Minolta bEST Technology Suite

BR