[QUOTE=schmeckles22;1499989]Thank you, I read that using the black drum as color with the chip change can cause issues with prints? Can you confirm this
FYI, I wouldn't recommend something on this forum if not proven to work!
[QUOTE=schmeckles22;1499989]Thank you, I read that using the black drum as color with the chip change can cause issues with prints? Can you confirm this
FYI, I wouldn't recommend something on this forum if not proven to work!
Last edited by copyman; 06-13-2020 at 12:08 AM.
Let's see if I can add to what's already here:
I've noticed that shades of blue will be the most difficult to reproduce since it uses all four colors. I've attached a document that you can print that might help differentiate which colors are troublesome.
First: clean corona wires and laser slit glasses.
Second: Print Letter chart.
Third: confirm which colors are affected.
Fourth: Replace affected drums.
Fifth: Perform stabilization and gradation.
Sixth: print Letter chart to confirm improvement.
You'll find the information that you need in the service manual.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks