Dislikes: 0
Hi all, I have a Konica Minolta Bizhub C364e and I want to activate Airprint on it. I have the latest firmware to install but is there a soft switch setting I need to change in service mode? Does anyone know what the setting is as I can't remember it.
If I remember correctly, once the firmware is installed you just need to go into admin and then network and enable airprintOriginally Posted by Alex1
Link sent.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Correct, if you downloaded the latest firmware you must enable AirPrint from the network settings.
Change the function version to 7
CE mode system 2 SW25 HEX 60.
Then enable AirPrint in admin>Network settings.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
After I done thus I can not log in to the machines interface nor can I scan to email. I changed the hex settings to 50 for SW25 rather then 60 does this effect it in anyway
Last edited by Alex1; 06-19-2020 at 12:51 PM.
60 not 70, not 50.
Sorry I meant 60. I'll try it again.
what model shows on top of a printed network configuration page?
I'm doing this remotely so I am unable to print out the sheet. But it worked it logged in thanks for the help.
Thanks: 
Likes: 
Reply With Quote
Bookmarks