May i know how to enable air print function , i upgrade firmware to A5C10Y0-F000-G20-M1 still can't found ( missing ) to on it .
May i know how to enable air print function , i upgrade firmware to A5C10Y0-F000-G20-M1 still can't found ( missing ) to on it .
These older models were not the best for mobile printing. See attached. Hopefully there is something in there that may help you.
After you have updated the firmware you need to enable function version 7.
In CE mode System 2 > Software Switch Setting>Switch 25 set to HEX 60.
Reboot then you will have the AirPrint option in admin mode. (its off by default)
SW 25 to HEX 60.pdf
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
There are two other SW that may need to be changed.
I would also update to the latest firmware version GDN-M1
Bizhub 4e Series - AirPrint Additional Information.pdf
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks