C1100. C3103 code. 2nd transfer not lifting
Checked all gears cleaned sensors no joy. Just codes up straight away. Any PPD guys out there who could point me in the right direction
Was getting C3104 originally cleared that as swing plate was locked
C1100. C3103 code. 2nd transfer not lifting
Checked all gears cleaned sensors no joy. Just codes up straight away. Any PPD guys out there who could point me in the right direction
Was getting C3104 originally cleared that as swing plate was locked
If at First you don't succeed remove all evidence of ever trying!
Hi what is the model?
Did you try I/O check mode 24-1 - 24-3 ?
I would first check if drive is not blocked.
Can you disengage motor from drive (let it rotate freely ) and then try I/O check again.
Never tried this but it should be possible to do.
If you get error again i would try replace motor first
like what toxic said i/o ps53 24-1 with door open and adu rolled out do not press start button and manually flag ps53 does should show 000 non pressure then flag it and see if goes 001 pressure.
Do you hear any noise?
Bookmarks