Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: C1100. C3103

  1. #1
    Service Manager 100+ Posts
    C1100. C3103

    big jase's Avatar
    Join Date
    Jul 2008
    Location
    Barnsley
    Posts
    129
    Rep Power
    26

    C1100. C3103

    C1100. C3103 code. 2nd transfer not lifting
    Checked all gears cleaned sensors no joy. Just codes up straight away. Any PPD guys out there who could point me in the right direction


    Was getting C3104 originally cleared that as swing plate was locked
    If at First you don't succeed remove all evidence of ever trying!

  2. #2
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,059
    Rep Power
    23

    Re: C1100. C3103

    Hi what is the model?

  3. #3
    Service Manager 100+ Posts
    C1100. C3103

    big jase's Avatar
    Join Date
    Jul 2008
    Location
    Barnsley
    Posts
    129
    Rep Power
    26

    Re: C1100. C3103

    Quote Originally Posted by Bix View Post
    Hi what is the model?
    The model is C1100
    If at First you don't succeed remove all evidence of ever trying!

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Dec 2009
    Posts
    348
    Rep Power
    30

    Re: C1100. C3103

    Did you try I/O check mode 24-1 - 24-3 ?

  5. #5
    Service Manager 100+ Posts
    C1100. C3103

    big jase's Avatar
    Join Date
    Jul 2008
    Location
    Barnsley
    Posts
    129
    Rep Power
    26

    Re: C1100. C3103

    Quote Originally Posted by Toxic View Post
    Did you try I/O check mode 24-1 - 24-3 ?
    Yes but get code on closing doors , get no drive.
    If at First you don't succeed remove all evidence of ever trying!

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Dec 2009
    Posts
    348
    Rep Power
    30

    Re: C1100. C3103

    I would first check if drive is not blocked.
    Can you disengage motor from drive (let it rotate freely ) and then try I/O check again.
    Never tried this but it should be possible to do.
    If you get error again i would try replace motor first

  7. #7
    Senior Tech 100+ Posts lucky13's Avatar
    Join Date
    May 2008
    Location
    silicon valley
    Posts
    103
    Rep Power
    26

    Re: C1100. C3103

    like what toxic said i/o ps53 24-1 with door open and adu rolled out do not press start button and manually flag ps53 does should show 000 non pressure then flag it and see if goes 001 pressure.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here