Hi man,
first use original toners, then check consumable status: drum, developer, transfer belt, transfer roller.
Then if the problem will be again empty yellow parts on printed paper, evaluate to change or refurbishind yellow developer.
Cheers
Hi man,
first use original toners, then check consumable status: drum, developer, transfer belt, transfer roller.
Then if the problem will be again empty yellow parts on printed paper, evaluate to change or refurbishind yellow developer.
Cheers
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Try same test print on A3 paper and post again.
Did somebody before "modify" DR/DV distance?
I know this is ancient thread but if this A4 size then it looks like what happened when I inserted a black drum in the yellow drum without changing the plastic part between them.
Are you sure you are sold a Y drum and not a chipped K but without that special plastic part that only the CMY drums have?
Bookmarks