Hello,
have a problem with a bizhub C227 with clacking noises when Paper feed from tray 2.
Does anyone have a solution?
Best wishers Andre
Hello,
have a problem with a bizhub C227 with clacking noises when Paper feed from tray 2.
Does anyone have a solution?
Best wishers Andre
Hi, more or less are you able to identify the noise area? Maybe it's the rollers
The red feed rollers and the torque limiter have already been replaced. Then works again 2-3 months until the error comes again.
What error? All you said was noise. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
5) You are the person onsite. Only you can make observations.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hi man,
first can you say exactly where noise starts at?
Check pickup roller, open front door, unmount screws of each paper cassette and check gears and clutches.
Grease white gears at the opposite of paper cassette assy a little bit
Sometimes a broken gear or exhausted clutches can do noises.
This is a possible solution but with a more clear explanation you will help us to understand the problem.
Cheers!
Hello again,
yes, the error is the noise, coming from the maschine when paper is feed from tray 2.
There are some people sitting around the maschine and are afraid of the noise, because its very loud and annoying.
Its only from tray 2. What we already did is, we changed the rollers with torque limiter and clutches.
The noise was gone for a couple of months and now hes back.
I was on vacation, when my colleague started this thread.
So i wasnt at the maschine yet, when the noise came back.
Next week, ill take a deeper look. maybe im able to make a sound file.
Sorry if there was a lack of information.
speaking of lack of information ... your profile is BARREN I mean NO info .. you claim to be a tech... list no 'trained on'.. no started in the industry ..
you claim the noise is the error.. when BC asked what error he meant ERROR CODE...
i am begging to suspect you were never formally trained on ANY MACHINE ( oh btw your spelling sux)
we have had imposters in here before ...
like another TECH has stated YOU are there .. noises are very hard to define in an internet forum
you supplied no total page counts ... no error codes... no video/audio of the noise .. HELL you can't even tell us WHERE the noise is coming from.
you really expect us to help you without BASIC info?
Bookmarks