konica 224e making alot of noise when starting and when printing colors

[Mitch Barron]

+1

Just confirming ... is this a C224e. You cannot do color on a 224e. =^..^=

just to confirm, yes is a 224e, Here in europe is a develop 224e, and yes you can print color it was printing fine till my boss when to replace TB unit and then the noise appear.

[copier tech]

just to confirm, yes is a 224e, Here in europe is a develop 224e, and yes you can print color it was printing fine till my boss when to replace TB unit and then the noise appear.

So it must be a C224e ?

[Mitch Barron]

[QUOTE=copier tech;1534690]So it must be a C224e ?[/QUOTE

yes it is a C224e.
And as I said before it make the same noise as when the cleaing blade for the transfer is clog, but I had clean it and also the pipe that goes to the rest toner, but nothing the nosie keeps happening when the machine start or when it stabilizing, and when I make color printings, when I make color printing the noise come back.
I have today changed the developer units but same noise.

[Blizzoo]

Hmm, I would check every colour drum units for any blocked waste/damaged gears on toner waste discharge area. I had a broken waste auger on Magenta cleaning unit on a different brand of copier clicking only in colour printing/copying.

[Mitch Barron]

Hmm, I would check every colour drum units for any blocked waste/damaged gears on toner waste discharge area. I had a broken waste auger on Magenta cleaning unit on a different brand of copier clicking only in colour printing/copying.

thanks Bliz, I had done all that nothing found, I just finished swapping the printing board but same thing. guess I have to break the whole machine down to see what is going on, since I had tried every advice from you guys here.

[tsbservice]

I don't remember but did you tried another TBU?

[Synaux]

since I had tried every advice from you guys here.

oh... ok...

And...

it was printing fine till my boss when to replace TB unit and then the noise appear.

A clue.

[Synthohol]

Does it print all 4 colors correctly?
Maybe theere is still packing material you missed on the new belt?

[Phil B.]

Does it print all 4 colors correctly?
Maybe there is still packing material you missed on the new belt?

I NEVER let my boss " fix shit " WHY you ask? because he is a TOTAL flaming idiot... he didn't even ' manage ' the employees.


he thought MICRO MANAGING was the 'wave' of the future ... that's fine at McD's but every employee was above the age of 35.... most in the 40-50yr range.. myself I was the oldest... yes EVEN older than he was .. I was in the industry for 10+ years more than him.

[mga]

just to confirm, yes is a 224e, Here in europe is a develop 224e, and yes you can print color it was printing fine till my boss when to replace TB unit and then the noise appear.

Europe Develop it would be +224e or a +224 for colour not 224e