konica minolta c454 copying problem

[romario]

[ATTACH] 46347 [/ ATTACH] buenas tardes amigos, alguien puede ayudarme Tengo una konica minolta c454, solo me falla en las líneas de copia en color cian y magenta, ya puse la fecha actual y continúo ... aquí adjunto las fotos [ COLOR = rgba (0, 0, 0, 0.54)] [/ COLOR] [COLOR = rgba (0, 0, 0, 0.54)] [/ COLOR]








[ATTACH] 46347 [/ ATTACH] [ATTACH] 46347 [/ ATTACH ]

[femaster]

You need to go through the "setup procedure" on the copier to eliminate the colored lines. It needs to be done exactly listed in the manual, or it will not work.

You should be able to find the procedure in the service manual if I remember correctly. I don't have access to the manual at the moment, and the Konica website is still down, so I can't help you out there.

[Synthohol]

líneas de vergüenza

[Phil B.]

[ATTACH] 46347 [/ ATTACH] buenas tardes amigos, alguien puede ayudarme Tengo una konica minolta c454, solo me falla en las líneas de copia en color cian y magenta, ya puse la fecha actual y continúo ... aquí adjunto las fotos [ COLOR = rgba (0, 0, 0, 0.54)] [/ COLOR] [COLOR = rgba (0, 0, 0, 0.54)] [/ COLOR]


[ATTACH] 46347 [/ ATTACH] [ATTACH] 46347 [/ ATTACH ]

a clear case of the " lines of shame " go back through the installation procedures... FOLLOW IT STEP BY STEP not missing the procedure listed.

Please in future posts post in your native language and in English.. not everyone one here knows Spanish and aren't going to use a translator to view your posts.

Normally I'd throw the RED CARD but I have been chewed out for such actions .

also being a newbie I'd suggest you review the FORUM RULES here ---> https://www.copytechnet.com/forums/misc.php?do=vsarules

[romario]

]Excuse me It will be that you can help me with the steps

[Phil B.]

]Excuse me It will be that you can help me with the steps

the steps are ln the installation guide and the service manual.

[copier tech]

[ATTACH] 46347 [/ ATTACH] buenas tardes amigos, alguien puede ayudarme Tengo una konica minolta c454, solo me falla en las líneas de copia en color cian y magenta, ya puse la fecha actual y continúo ... aquí adjunto las fotos [ COLOR = rgba (0, 0, 0, 0.54)] [/ COLOR] [COLOR = rgba (0, 0, 0, 0.54)] [/ COLOR]








[ATTACH] 46347 [/ ATTACH] [ATTACH] 46347 [/ ATTACH ]

These lines occur you you have not set the machine up from new.

Since this is an old machine it can't be new, have you done work on it?

Bizhub C454 C554 Installation.pdf

[fatduke]

Dear pal

"LINES OF SHAME",

install and setup machine again.

Don't forget to set the correct date/time while installing.

Cheers

[romario]

[COTIZACIÓN = tecnología de copiadora; 1535912] Estas líneas se producen cuando no ha configurado la máquina desde nuevo.

Como esta es una máquina vieja, no puede ser nueva, ¿ha trabajado en ella?

[ADJUNTO] 46352 [/ ADJUNTO] [/ CITA]

thanks for your help friend, I did not have the installation steps, very friendly






[COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR][COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR]

[copier tech]

[COTIZACIÓN = tecnología de copiadora; 1535912] Estas líneas se producen cuando no ha configurado la máquina desde nuevo.

Como esta es una máquina vieja, no puede ser nueva, ¿ha trabajado en ella?

[ADJUNTO] 46352 [/ ADJUNTO] [/ CITA]

thanks for your help friend, I did not have the installation steps, very friendly






[COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR][COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR]

No problem. Hope you can understand it Ok in English.