Hi guys, i have that line that comes out on the side of thesheet, sometimes it is cyan, sometimes magenta, I already changed drum/dev,of the 3 colors and nothing, any suggestion.
IMG_20200803_093724.jpg
Hi guys, i have that line that comes out on the side of thesheet, sometimes it is cyan, sometimes magenta, I already changed drum/dev,of the 3 colors and nothing, any suggestion.
IMG_20200803_093724.jpg
What orientation is the paper going? As it could be transfer if its landscape
Sent from my VTR-L09 using Tapatalk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
It is horizontally oriented, from Tray 1
Agreed. Looks like t-belt is not cleaning itself.
If you take out the transfer unit there might be a small shard of paper of fluff stuck in the cleaning unit. Or the belt is just worn. I sometimes take apart the itb cleaning assembly and clean it out just in case anything has become lodged in there. And if you can clean and redust the blade with some powder lubricate or yellow toner. And after that run 15 pages of yellow halftone prints to lubricate the belt.
Sent from my VTR-L09 using Tapatalk
Bookmarks