Was on 2.2v failed hard drive and memory. upgraded and replaced both. Now wont activate with clean install.
EFI is little help.
am i stuck rolling back to V 1.2? or can this be solved?
Customer Service
Was on 2.2v failed hard drive and memory. upgraded and replaced both. Now wont activate with clean install.
EFI is little help.
am i stuck rolling back to V 1.2? or can this be solved?
Customer Service
Was it running win xp or 7 or 10?
The windows license key sticker is not valid?
I have a few fierys in my basement I converted into win 10 workstations but I remember using the key from another fiery to get one going running the real fiery system software.
Xp is no longer supported and I don't think the win7 ones update either.
You may need to roll back and see if it will let you patch it to 2.2.
Yes it will take hours but if it works.....
Also rumor has it that KMSPICO works too.
only has a LTSC/LTSB windows 10 sticker.
i know it was working when i got to it on V1.3 (i think).
ill try that road if they don't write back tonight...
take a long time, takes forever. 4 DVD to install, 2 more for 2.2 maybe more.
my one dealer says 2.2 upgrade is not even available...
not worried about activating windows 10, worried that EFI looks for the bios? or the windows 10 key.
was also told to do it offline. so it will let you send them a code to activate.
So what i have learned.....
IS EFI are a pain to deal with...
Think it needs a legit V2.0 update. Rolling back to 1.2v make sure everything works.
Last edited by methogod; 08-06-2020 at 04:28 AM. Reason: Jumped too soon...
EFI as a support system is not bad. Been chating with jorgan from efi back and forth. After no luck with 2.2v (never authorized LAC).
Clean installed 1.2 and got an error, send error transcript to jorgan and he emailed me different ISO then i got from EFI and MKM.
Still have issues sharing folders, but its printing.
Bookmarks