A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
I didn't have an oportunity to try this yet but can it be done by removing parts from DR313K and fitting them into DR313CMY used unit?
It take some time but saves a lot of money if machine is yours out in lease.
Parts for exchange: Drum cylinder, cleaning blade, charging roller, chargin roller cleaner.
I never played with these on customer owned machines.
Always sold them new CMY drums whatever series.
The "new style"... I'm guessing you are referring to DR314K / AACJ0RD in U.S. I've seen available but not had one in hand yet.
We were talking about DR313K / A7U4-ORD. We primarily sell r/f machines and the 8e series are starting to arrive.
Also guessing the DR314 will be backward compatible and one day we won't be able to get DR313's. If we save our DR313cmy cores for the end caps we should be ok unless they discontinue selling DR313k.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Yes, we've covered that. Do you have anything specific to add? Such as the old vs new style mentioned by tsbservice and what if any different steps you take? Apparently what we have seen so far can be referred to as old style.
I think we've reached a point where pics would be most helpful bc we've seen pics of the "old style" caps that are def. swappable.
Anyone with pics of the new style supposedly not swappable?
Thanks!
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks