When the equipment arrived in our office in December, it turned on and worked perfectly. And it was off for about three months. And when he came back, the team didn't turn on the panel. That in black, the power button in pink.
Enviado desde mi SM-J701M mediante Tapatalk
You can have trouble with dimm memory in mfpb. change it on working one
Last edited by zoool; 08-11-2020 at 01:32 PM.
The steps you takeOriginally Posted by zoool
Step 1
disconnect and replace Memory board/1 (MEMB/1).
Step 2
Disconnect the connector
Dual scan image processing board (DSIPB)
Step 3
Disconnect the HDD
If you have another suggestion, it will be well received.
Enviado desde mi SM-J701M mediante Tapatalk
If you hear machine go through normal warm up cycle try and log onto copiers web interface page. If you can get onto that page the control panel is most likely bad. If not try loading firmware.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks