Phantom Part Number? Cant find anywhere....

[Albonline]

Was told that it was to be removed and replaced with the interface board that came with the MIC4150.

same thing only longer to extend. past panels

[emujo2]

nobody looked in the parts manual?
i believe you are looking for parts 13 and 18?

Thought you might be on to something...but...the Fiery install guide has you remove this interface assy and replace it with the Fiery Assy. E

[Synthohol]

Sonofabitch.
Looked exactly like it.
I don't recall fierys coming with an interface kit in the box though.
It's not even listed on the MIC parts list.

[oscar]

would you still have this MIC-4150 installation manual:

Hi,
I lost Relay board with mounting bracket.
The board is labeled with number 2 on page 17
Does anyone know where I can buy the missing part?


http://swdownload.efi.com/ftpvefigs/...andService.pdf



Attachment 48187

[methogod]

I have given up on this project, if you need the black box that comes with the MIC4150 I have it. If you want the server i have it as well. msg me.

[wjurls]

Doubt you still need it, but I just acquired a 1250 with a MIC-4150 and interface installed that I plan to retro back to the stock controller.

If you still need the interface let me know.

Lee