Konica Minolta C454

[Kenny]

Hi guys,

We currently have a konica minolta c454 that will not take firmware, I have tried to to do the procedure but its boots up as normal.

I have done the follwing:

Tried various USB's
formatted all USB'S to FAT32
Blown out USB port
re-wrote firmware off of USB's and re-downloaded

we are currently trying to update the firmware to the special scan to email firmware as the machine is getting a forward TX error when scanning to email.

Any suggestions will be appreciated

[tsbservice]

Try to leave front door open.

[copier tech]

Hi guys,

We currently have a konica minolta c454 that will not take firmware, I have tried to to do the procedure but its boots up as normal.

I have done the follwing:

Tried various USB's
formatted all USB'S to FAT32
Blown out USB port
re-wrote firmware off of USB's and re-downloaded

we are currently trying to update the firmware to the special scan to email firmware as the machine is getting a forward TX error when scanning to email.

Any suggestions will be appreciated

What firmware version are you using, maybe it's not the correct version for your non 'e' C454.

USB works best no larger than 2GB.

And silly question, you are using the correct service USB slot?

[Kenny]

thank you for the replies guys,

I have managed to get it to boot to the screen with the fins and doesn't boot to the normal copy screen. I have been waiting for about 10 minutes for it to boot to the firmware screen, is this normal?

[copyman]

thank you for the replies guys,

I have managed to get it to boot to the screen with the fins and doesn't boot to the normal copy screen. I have been waiting for about 10 minutes for it to boot to the firmware screen, is this normal?

I've had it take 10+ mins. Just wait

[Kenny]

still not booted to firmware screen, surley it doesnt take this long?

[copier tech]

still not booted to firmware screen, surley it doesnt take this long?

What firmware version are you using, maybe it's not the correct version for your non 'e' C454.

USB works best no larger than 2GB.

And silly question, you are using the correct service USB slot?

[emujo2]

Are you seeing the black dot in the upper corner while it's trying to boot? E

[emujo2]

Hi guys,

We currently have a konica minolta c454 that will not take firmware, I have tried to to do the procedure but its boots up as normal.

I have done the follwing:

Tried various USB's
formatted all USB'S to FAT32
Blown out USB port
re-wrote firmware off of USB's and re-downloaded

we are currently trying to update the firmware to the special scan to email firmware as the machine is getting a forward TX error when scanning to email.

Any suggestions will be appreciated

Did a little research (and this has been posted before) the non-e models must 1st be converted to e models before the special firmware can be applied..So if you are trying to put C454e into a C454 it won't work directly. E

[copier tech]

Did a little research (and this has been posted before) the non-e models must 1st be converted to e models before the special firmware can be applied..So if you are trying to put C454e into a C454 it won't work directly. E

Thus my question asking what version he is trying to use.