Results 1 to 7 of 7
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2010
    Location
    Denver, Colorado; St Louis Mo.
    Posts
    70
    Rep Power
    0

    Konica 458E wont turn on

    I checked the AC voltage in at the DC power supply it is good, no voltage coming out of the DC power supply. Replaced the DC power supply still wont turn on and no voltage coming out of the power supply

  2. #2
    Service Manager 10,000+ Posts
    Konica 458E wont turn on

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,792
    Rep Power
    661

    Re: Konica 458E wont turn on

    Quote Originally Posted by bigdcopy View Post
    I checked the AC voltage in at the DC power supply it is good, no voltage coming out of the DC power supply. Replaced the DC power supply still wont turn on and no voltage coming out of the power supply
    so something between the two is messed up.. have you measured continuity on the harnesses?

    what is the next board in the chain?

    sounds like it could have taken a hit from electrical storm?

    so many q's so little info given

    what all have you tried

    you really need to give us more to go on since you are there we are not.

    Phil B. ' The Dentist '

  3. #3
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    783
    Rep Power
    41

    Re: Konica 458E wont turn on

    repl mfp and possible eemcb. had this many times

  4. #4
    Senior Tech 250+ Posts
    Join Date
    May 2016
    Posts
    428
    Rep Power
    26

    Re: Konica 458E wont turn on

    Quote Originally Posted by bigdcopy View Post
    I checked the AC voltage in at the DC power supply it is good, no voltage coming out of the DC power supply. Replaced the DC power supply still wont turn on and no voltage coming out of the power supply
    Have you check fuses for continuity (on the board)
    Have you checked power outlet on the wall?
    If fuses are ok on the first board you should not end up with another dead board.
    You should get some output.
    If MFP and DC PS boards are OK you should try with control board. (on the right side looking from behind)

  5. #5
    Master Of The Obvious 10,000+ Posts
    Konica 458E wont turn on

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: Konica 458E wont turn on

    Most copiers provide 5vdc to the MFP board to boot up. Ordinarily I would check that the 5vdc is present at the MFP board. But since you've already changed out the DC Power Supply, it's likely that you're getting the 5vdc.

    Once booted, the MFP board sends a signal back to the power supply to provide the rest of the voltages 24vdc, 12vdc, other 5vdc, etc. So most likely the MFP board is not sending that signal.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,572
    Rep Power
    73

    Re: Konica 458E wont turn on

    Agree with Blackcat..Just had this and it was the main board.

  7. #7
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,154
    Rep Power
    346

    Re: Konica 458E wont turn on

    Quote Originally Posted by Woxner View Post
    repl mfp and possible eemcb. had this many times
    Not that BC isn't right(in fact almost always) but it was Woxner first to reply.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here