Hi guys,
Is there any dip SW for resetting the toners of a C554e.
There's no error codes displaying but it keeps on saying Toner (Y) is low.
Also in the service mode>state confirmation>level history 1 TCR-Y is at approximately 3% while the others are at approx 6%.
Have done ,Stabilization, Hopper Filling, Manual Toner Add but its not increasing the level history or even clear the Low toner alert.
Apart from the above, I have also checked and cleaned;
Drive Unit
Sub Hopper Unit
Fusing Drive Unit
HVB Unit (Have confirm, no signs of shorting or arcing at all the contacts, plastic casing of the HV and developer contact assemblies to the frame and nearby components or wiring).
Toner is full and also the dev unit is new.
C308 dose have a dip SW for resting the toner so i hope C554e would have too.
Your response may help.
Appreciate you all in advance.
Bookmarks