Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jan 2012
    Posts
    147
    Rep Power
    26

    C454e Will not turn on

    Hello
    I just received a Konica Minolta Bizhub c454e in for a customer of ours and it tested fine. I came in this morning and turned it on to get the meter before delivering the machine and it would not turn on. When I turn on the power switch I see the start button light up yellow hear a relay click and a motor start to turn and then it stops. After about a minute this repeats until I turn it off. I tried disconnecting the finisher and adf with no change and when I left the door open with the exception of the motor not starting no change. I tried doing a firmware update and when I turn it on the start button turns yellow no relay and it takes a minute or two before it tries to restart. I usually work on Toshiba machines and this one is stumping. Any suggestions would be greatly appreciated.

    Thank you in advance

  2. #2
    Senior Tech 100+ Posts
    C454e Will not turn on


    Join Date
    Nov 2008
    Posts
    207
    Rep Power
    34

    Re: C454e Will not turn on

    Quote Originally Posted by Valintine View Post
    Hello
    I just received a Konica Minolta Bizhub c454e in for a customer of ours and it tested fine. I came in this morning and turned it on to get the meter before delivering the machine and it would not turn on. When I turn on the power switch I see the start button light up yellow hear a relay click and a motor start to turn and then it stops. After about a minute this repeats until I turn it off. I tried disconnecting the finisher and adf with no change and when I left the door open with the exception of the motor not starting no change. I tried doing a firmware update and when I turn it on the start button turns yellow no relay and it takes a minute or two before it tries to restart. I usually work on Toshiba machines and this one is stumping. Any suggestions would be greatly appreciated.

    Thank you in advance
    Probably MFP board. I had a similar issue on a c658 and the board was the problem.

  3. #3
    SanDiegoCopierRepair.com 1,000+ Posts
    C454e Will not turn on

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    Re: C454e Will not turn on

    Quote Originally Posted by Valintine View Post
    Hello
    I just received a Konica Minolta Bizhub c454e in for a customer of ours and it tested fine. I came in this morning and turned it on to get the meter before delivering the machine and it would not turn on. When I turn on the power switch I see the start button light up yellow hear a relay click and a motor start to turn and then it stops. After about a minute this repeats until I turn it off. I tried disconnecting the finisher and adf with no change and when I left the door open with the exception of the motor not starting no change. I tried doing a firmware update and when I turn it on the start button turns yellow no relay and it takes a minute or two before it tries to restart. I usually work on Toshiba machines and this one is stumping. Any suggestions would be greatly appreciated.

    Thank you in advance
    Bad Power Supply or MFP board (or memory or the control panel itself, or nvram or ssd etc.....etc......)

    With the symptom you described I would start with the power supply. Measure all those 24v and 5v voltages to see if you are missing any and check fuses.
    Another easy thing to try is removing and then reseating the memory.

    If power supply checks out as good and reseating memory doesn't help then replace mfp board.
    Last edited by blazebusiness; 08-26-2020 at 07:22 PM.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  4. #4
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,421
    Rep Power
    39

    Re: C454e Will not turn on

    If it has dual scan, make sure the card on MPFB is well mounted. It may have come off

  5. #5
    Field Supervisor 500+ Posts
    C454e Will not turn on

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    641
    Rep Power
    32

    Re: C454e Will not turn on

    I went through this once on a C364. When power on, it showed the panel leds lighting up and even the screen lights up, it restarted. I installed an SSD from another C364 printer and it worked fine. With the bad SSD the printer did not accept or update.
    Nothing like day after day

  6. #6
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: C454e Will not turn on

    If it's rebooting replace SSDB.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here