Thanks: 
Likes: Printing quality is not good and copy also, There is no error message (there is no error code)
please see the attached photos
Dislikes: 0
Printing quality is not good and copy also, There is no error message (there is no error code)
please see the attached photos
Change the side door charger
Sent from my SM-G960U using Tapatalk
You might also have a broken second transfer roller mount. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Agreed ......got to be a transfer issue. Any C2151 codes in service mode error history? Did you check that assembly? Pressure looks like it is not being not evenly applied. Something is not moving properly. Pressure is applied by the 2nd transfer pressure motor (M3) .Originally Posted by blackcat4866
Almost certainly 2nd transfer issue but I guess even the ITB unit itself in theory could also cause this. Let us know what the fix is.............
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
That definitely looks like a transfer problem. I agree with others in that it really looks like something is wrong with 2nd transfer. If there was a problem with the ITB causing that much image missing, you should see the "oil can" in service mode and probably have some P-Codes associated with incorrect readings from the density sensors under the belt.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
I'd bet one side of your transfer roller is broken.
There is a black plastic piece on the left side, where the transfer belt is attached.
Without it, the 2nd transfer unit does not close properly and defects like this can occur.
I know this is commonplace, but it can help.
As friend Phil B says: "The Dentist"
Nothing like day after day
Thanks
Yes your are right, there was problem with second transfer roller unit
Second Transfer roller unit has been fixed properly and now its working fine
There is a black plastic piece on the left side, where the transfer belt is attached.
Without it, the 2nd transfer unit does not close properly and defects like this can occur.
I know this is commonplace, but it can help.
As friend Phil B says: "The Dentist"
Right side plastic piece was broken, i fix it and now its working fine
Thanks
Reply With Quote
Bookmarks