Thanks: 
Likes: message on control panel...Bin Full ..not sure what's this mean!!
Sent from my SM-N950U using Tapatalk
Dislikes: 0
message on control panel...Bin Full ..not sure what's this mean!!
Sent from my SM-N950U using Tapatalk
man the bin (output) is full or the sensor is brokenOriginally Posted by antone
4.4 Understanding the printer messages
4.4.1 Bin full. Remove paper.
Remove the paper stack from the standard bin.
So, check where the prints exit at the top of the printer. There is a sensor flag on the right hand side as you face the front of the printer. That flag triggers the "NARROW MEDIA/BIN FULL SENSOR"
Flag is stuck
or
Flag is broken
or
Paper in the bin reached a height which correctly triggered the sensor (so remove paper)
Last edited by blazebusiness; 09-12-2020 at 12:20 AM.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
Like they both said it's exit tray regarded as output bin. I believe due non KM origin of this model.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Took a part copier..cleaned senors All set ! exit senor
Sent from my SM-N950U using Tapatalk
Hi antone. Did you receive my PM?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Reply With Quote
Bookmarks