Konica Software Switch settings (complete)

[jotunn]

33	00000000	00
33	00000001	01	Renders some functions, whichwere available when both administrator authentication and key counter were provided with when using the vendor, available only with administer authentication.	Available only with administrator authentication
33	00000010	02	To use DipSW of " When the vendor device is off, job cancel timing is selectable with "immediately" or "after job completion". " in Vendor2 mode.	after job completion
33	00000100	04	When setting to vendor 2, make transfer fax function available.	Enabled
33	00001000	08	Allow/ Prohibit Web print when using Vender2.	Prohibit
33	00010000	10	Enables or disables the automatic tray switching function when the vendor is installed.	Enabled
33	00100000	20	Enables or disables the function that enables the box function when setting the key counter I/F vendor.	Enabled
33	01000000	40	Enables or disables the Real Mode Twain function when setting the vendor or management device.	Enabled
33	10000000	80

71	00000000	00
71	00000001	01	In the "Counter" screen, a total counter can be added at the top of the screen besides the left four counters.	Enabled
71	00000010	02	Enable/Disable the ability to hide color-related keys.
71	00000100	04	Function that hard copies can not be seen by others after a print error	Enabled (To make hard copies unavailable to others: Disabled browsing)
71	00001000	08	To display the screen that asks a password, when logging to the user settings	Enabled
71	00010000	10	In the utility menu, after meter count is pressed , then check details is pressed, the print list in the serial number screen is pressed, the administrator password screen is displayed.	Enabled
71	00100000	20	Hide Destination Type strings (eg. E-mail, SMB, FTP) on destination buttons in Scan/Fax Address Book.	Enable
71	01000000	40	Enable/Disable the function that allows setting only files that can be encrypted during Scan.
71	10000000	80	Disable Public User deleting a job on the operation panel.	Enabled (Public User cannot delete the job)

[domovoi3333]

33	00000000	00
33	00000001	01	Renders some functions, whichwere available when both administrator authentication and key counter were provided with when using the vendor, available only with administer authentication.	Available only with administrator authentication
33	00000010	02	To use DipSW of " When the vendor device is off, job cancel timing is selectable with "immediately" or "after job completion". " in Vendor2 mode.	after job completion
33	00000100	04	When setting to vendor 2, make transfer fax function available.	Enabled
33	00001000	08	Allow/ Prohibit Web print when using Vender2.	Prohibit
33	00010000	10	Enables or disables the automatic tray switching function when the vendor is installed.	Enabled
33	00100000	20	Enables or disables the function that enables the box function when setting the key counter I/F vendor.	Enabled
33	01000000	40	Enables or disables the Real Mode Twain function when setting the vendor or management device.	Enabled
33	10000000	80

71	00000000	00
71	00000001	01	In the "Counter" screen, a total counter can be added at the top of the screen besides the left four counters.	Enabled
71	00000010	02	Enable/Disable the ability to hide color-related keys.
71	00000100	04	Function that hard copies can not be seen by others after a print error	Enabled (To make hard copies unavailable to others: Disabled browsing)
71	00001000	08	To display the screen that asks a password, when logging to the user settings	Enabled
71	00010000	10	In the utility menu, after meter count is pressed , then check details is pressed, the print list in the serial number screen is pressed, the administrator password screen is displayed.	Enabled
71	00100000	20	Hide Destination Type strings (eg. E-mail, SMB, FTP) on destination buttons in Scan/Fax Address Book.	Enable
71	01000000	40	Enable/Disable the function that allows setting only files that can be encrypted during Scan.
71	10000000	80	Disable Public User deleting a job on the operation panel.	Enabled (Public User cannot delete the job)

Thanks

[Toxic]

What could be the reason i can not change dipsw 227 to 80 - fix, to hide consumables status, it revert back to 00.
I see that today on ineo +227

[elmaligno]

What could be the reason i can not change dipsw 227 to 80 - fix, to hide consumables status, it revert back to 00.
I see that today on ineo +227

you need to have the firmware updated

[tsbservice]

What could be the reason i can not change dipsw 227 to 80 - fix, to hide consumables status, it revert back to 00.
I see that today on ineo +227

Try 08 instead 80. Those 227 and 230 switches are either 00/08/48/80 in most models. As manual is often wrong about values I sometimes play with them until machine accept value and then check the outcome
P.S. Happy holidays!

[joe0705]

How to enable toner status counter ?

[rrrohan]

hiding consumable counts doesnt work on 4 series. so the original 227 might not be compatible neither

[tsbservice]

hiding consumable counts doesnt work on 4 series. so the original 227 might not be compatible neither

afaik it should work on 4e.

[strider5555]

Here is a bulletin with all the intelligent yield control settings and models it works with. For the B227 it must have G3 or newer firmware, Function version 3.2. On 4/4e models it only works when connected to Vcare.

[jotunn]

For C224e series, hiding consumables button works for sure. Just use latest mass production firmware (probably even earlier would work as well) combined with function version 7 DipSW setting.

It's just a subset of the larger set of functions called "Intelligent Yield Control". With Intelligent Yield Control you let the machine to manage it's own consumables, and usually you wish to hide the button so the customer doesn't bother you with misleading (stupid) phone calls.
This is one, and the only function of DipSW 227-80 and DipSW 230-08.

227 10000000 80 Hide consumables statuses function (Hide on the Panel and PSWC)
230 00001000 08 Hide consumables statuses function (Block MIB information of consumables to applications and so on.)

@tsbservice
DipSW 227-48 probably can give you "Deleting temporary scan data function" and "The character array of the keyboard is changed from French to Canadian French."
DipSW 230-40 "Prevent sending to wrong destinations inadvertently when broadcast transmission."