Hi guys,
Unfortunately, she won't play along, I am attaching some more pictures so you can see what I am talking about.
Again, I was in a middle of a job, was in about 2 hours of almost non-stop printing, almost a thousand clicks, and then it just threw the J-3003 and she wouldn't print no more. The bushings on the reg roller seemed clean (as I said I gave them a quick clean up but they weren't that dirty to begin with), I even added some more WD-40 to see if it's to blame but it jammed again, same code on the next sheet it pulled.
One of the two pictures shows exactly how the jammed paper was when I opened the side door. Once it cooled down after an hour of inactivity or so she would print again normally. The second photo is what I printed after waiting for a bit and as you can see the sheet came out wrinkled, not sure if it's just a coincidence or not.
Seems like something is wrong with the paper path between the transfer section and the fusing section?
Thanks.
Bookmarks