Getting E3-01 in Konica Minolta 654e (B&W).
Kindly advise if it needs to upgrade the firmware.
Thanks and Regards,
Getting E3-01 in Konica Minolta 654e (B&W).
Kindly advise if it needs to upgrade the firmware.
Thanks and Regards,
Updating F/W is always a good place to start with those odd codes. Also check if any bulletins specific for that code.
Check that correct memory is installed or replace memory
Do a memory test in service mode.
Last edited by blazebusiness; 09-15-2020 at 01:25 PM.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
As other have said, firmware needs to be updated. In the early days, those errors would show up constantly in the logs. There was a firmware update released that specifically addressed this error. There has been a few more updates since that time, so if you can get your hands on the latest, you will be all set.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
Bookmarks