Results 1 to 9 of 9
  1. #1
    Senior Member 50+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    58
    Rep Power
    7

    B4052 / b4752 replace imaging unit message

    Hi All,

    I have a few B4052's, need to disable the replace imaging unit message.
    I have attempted DIPSW 51 Hex 20 and have had no luck.

    Is there any other dipsw that could assist me with this issue.

  2. #2
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,074
    Rep Power
    86

    Re: B4052 / b4752 replace imaging unit message

    Glad to see you are not sacked like the many other of the Durban techs.

    First tel me how you get those image units to run over life...

    Ain't a Konica Minolta so not sure if KM kung fu will work

    They are chipped and not sure if a hack exists.
    Sure you will be able to get chips/programmer to get past that.
    Whatever

  3. #3
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    2,687
    Rep Power
    123

    Re: B4052 / b4752 replace imaging unit message

    They are chipped don't know if usual KM stuff will work. They're quite cheep and I don't think they will last longer than quoted so not much to bother.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  4. #4
    Senior Member 50+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    58
    Rep Power
    7

    Re: B4052 / b4752 replace imaging unit message

    Quote Originally Posted by allan View Post
    Glad to see you are not sacked like the many other of the Durban techs.

    First tel me how you get those image units to run over life...

    Ain't a Konica Minolta so not sure if KM kung fu will work


    They are chipped and not sure if a hack exists.
    Sure you will be able to get chips/programmer to get past that.
    Hi Allan,

    Taking it a day at a time.


    The site has upgraded 80 of thier B4050's to the mentioned model. They print 10% coverage at max the B4050 dipsw work fine I got approximately 100000k per Imaging unit. Thought I could get rid of the message on the B4052.

  5. #5
    Senior Member 50+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    58
    Rep Power
    7

    Re: B4052 / b4752 replace imaging unit message

    Quote Originally Posted by tsbservice View Post
    They are chipped don't know if usual KM stuff will work. They're quite cheep and I don't think they will last longer than quoted so not much to bother.
    Hi,

    I must agree with you, however I am trying to take care of the pennys as I have to produce cost of sale stats on a monthly basis. I am just looking for room for improvement where possible.

  6. #6
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,074
    Rep Power
    86

    Re: B4052 / b4752 replace imaging unit message

    Would said site be Clover SA..
    Whatever

  7. #7
    Senior Member 50+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    58
    Rep Power
    7

    Re: B4052 / b4752 replace imaging unit message

    Quote Originally Posted by allan View Post
    Would said site be Clover SA..
    Unfortunately not..... Hobour terminals and storage.

  8. #8
    Service Manager 2,500+ Posts
    B4052 / b4752 replace imaging unit message

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,864
    Rep Power
    80

    Re: B4052 / b4752 replace imaging unit message

    once the message comes up its too late, its there until its replaced.
    but before that...
    [Service Mode] -> [System 2] -> [Unit Change] set warning times to "do not display"
    you can also set switch 227 to 80 so it hides the consumable gauges in utility.

  9. #9
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,100
    Rep Power
    25

    Re: B4052 / b4752 replace imaging unit message

    My bizhub 4052 imaging units often last 70% of their expected life. Rare units have lasted over 100%. Allan sure the printer stops? For now, I haven't had anyone stop by. The only problem was the quality but some customers were fine with it because they only printed text.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here