Thanks Thanks:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Service Manager 10,000+ Posts
    Bizhub c280 stopping inside the fusing unit

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    13,375
    Rep Power
    448

    Re: Bizhub c280 stopping inside the fusing unit

    Quote Originally Posted by Adeboy View Post
    I was able to get make the shaft roll, but it's now getting stuck at the exit tray
    I assume you're talking about the internal tray and it has no finisher? If that's the case, is the paper coming all the way out or getting stuck before it completely exists the machine?

    I still suspect that you're losing drive at the fuser because the fuser is the last thing before the exit tray. It could be the sensor.

  2. #12
    Senior Tech 100+ Posts
    Bizhub c280 stopping inside the fusing unit

    orestesp's Avatar
    Join Date
    Sep 2019
    Location
    Athens
    Posts
    211
    Rep Power
    13

    Re: Bizhub c280 stopping inside the fusing unit

    If paper isn't feeding from the bypass tray, you will probably need to replace all 3 feed rollers (pick-up, feed, separation).

    I am not an expert on the machine, but in order for the experts to help you you should also post the total counter on the machine, as well as the state of its consumables.

    Sent from my Redmi Note 5 Pro using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here