Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Oct 2019
    Location
    Ioannina
    Posts
    9
    Rep Power
    0

    Bizhub 554e jam duplex code 93-10

    Hello guys
    I have a bizhub 554e with constant error 93-10 when trying to print or copy duplex.
    I have cleaned the ADU unit and Registration Unit.
    I have changed the solenoid assy (P/N: Α161Ρ72644) but the problem still remains.
    Any suggestions?

  2. #2
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    2,865
    Rep Power
    130

    Re: Bizhub 554e jam duplex code 93-10

    Check two duplex sensors and their actuators and springs.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  3. #3
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,134
    Rep Power
    88

    Re: Bizhub 554e jam duplex code 93-10

    Quote Originally Posted by tsbservice View Post
    Check two duplex sensors and their actuators and springs.
    Yea could be that.
    The sensor on the reversal unit it for the fuser exit. Its on the door side on top.

    Got distracted with the solenoid the spring there and the gate.
    Looks like it jams into the gate but no...

    Sensor on the reversal unit it for the fuser exit. Its on the door side on top.
    The actuator holder clip breaks.
    What makes it strange is that it works just fine doing single sided prints but
    otherwise continuously or intermittently jams double sided.


    Tried glue... no good gets hot there. Plastic goes brittle from the fuser heat.
    3 pieces of a paper clip.
    1 piece to make a u shape to hold the actuator where the clip on the assy body broke.
    1 piece to keep shaft and flag from moving to the one side.
    1 piece to keep it from sliding to the other side.
    That keeps the flag free to pop back and keeps it in position.

    The paper clips gets clamped between the metal sensor brkt and the metal base plate.
    Will try and remember to take photos.
    Last edited by allan; 4 Weeks Ago at 01:19 AM.
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here