Page 2 of 8 FirstFirst 12345678 LastLast
Results 11 to 20 of 75
  1. #11
    Technician subalot's Avatar
    Join Date
    Sep 2020
    Location
    vienna
    Posts
    39
    Rep Power
    15

    Re: C452 Dumpster to the Rescu(r)e!?!

    Quote Originally Posted by Max View Post
    First thing 1st. Clean the laser glass x4 with the magic wand. The wand should be in the 2nd tray. Check the transfer roller, sometimes clip brakes at the back end. Will give you a partial copy. Could be many other thing also tbh.
    Magic wand was the fist thing i did "to" the machine. will check the transfer roller-once i figured out what excactly i do have to check there-yes i do have a field service manual for the device:-)
    i am aware that this could get quickly out of hand-therefore i decided to admit i am not capable doing this and i do have to rely on community kindess here^^

    thank you for your input, best regards:-)

  2. #12
    Technician subalot's Avatar
    Join Date
    Sep 2020
    Location
    vienna
    Posts
    39
    Rep Power
    15

    Re: C452 Dumpster to the Rescu(r)e!?!

    Quote Originally Posted by copyman View Post
    Appreciate your honesty and the effort. Ha-ha I've done a little dumpster diving myself in the past.

    I'm a believer if you are able to get paper to exit a Kon/Min copier without any service "trouble" codes (the codes you have are warning codes all related to print quality) than there is life left in machine

    I wouldn't put a lot of $$ into it but you may be able to find Image units really cheap on ebay. If you give machine a good cleaning and new Image units you should be good to go. Use ONLY genuine Kon/Min toner, also prob very cheap on ebay.

    Best of luck
    i truly like your opinion regarding if machine´s spittin out some paper, Sir!

    found just the drum for 65$ per color, reset chip for 25$. i would have to disassemble the Drum unit and replace the chip and the drum itself.
    is there any kind of developer or some refilling involved-or is it really just disassembling-replace parts-reassemble? please excuse my stupid question

    locally there is a guy who sells all color developers for 400 bucks tho. NIB...meh-.- to much $$ imho for the dumpster-machine.

    found toner cmyk for 60$ a pop. reasonable i think...

    best regards
    Last edited by subalot; 09-29-2020 at 08:23 AM. Reason: grammar

  3. #13
    Technician subalot's Avatar
    Join Date
    Sep 2020
    Location
    vienna
    Posts
    39
    Rep Power
    15

    Re: C452 Dumpster to the Rescu(r)e!?!

    Quote Originally Posted by blackcat4866 View Post
    Unless you plan to start your own C452 graveyard, it's going to be frustrating and expensive (if you are able to find the parts you need).

    Before you dedicate too much time and resources, dig a deep hole out behind the garage, shove it in, then cover it up. Then forget where you buried it. =^..^=
    Yes Sir, i do have 2500 square-feet garden which would be able to "hide" several of those^^

    Hiring landscape-guys/gardener now!!!

    thank you so much for your honest answer, of couse all the best to you^^

  4. #14
    Service Manager 1,000+ Posts
    C452 Dumpster to the Rescu(r)e!?!


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: C452 Dumpster to the Rescu(r)e!?!

    gonna be funny when the next person to own that home finds it when digging in backyard

  5. #15
    Certified Konica Expert 2,500+ Posts
    C452 Dumpster to the Rescu(r)e!?!

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,941
    Rep Power
    216

    Re: C452 Dumpster to the Rescu(r)e!?!

    looks to me like the 2nd transfer pressure assy is broken, like only 1/2 of the transfer roller is making contact with the belt.

  6. #16
    Service Manager 1,000+ Posts
    C452 Dumpster to the Rescu(r)e!?!


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: C452 Dumpster to the Rescu(r)e!?!

    Quote Originally Posted by Synthohol View Post
    looks to me like the 2nd transfer pressure assy is broken, like only 1/2 of the transfer roller is making contact with the belt.
    good idea. ive had plenty break on c754

  7. #17
    Technician subalot's Avatar
    Join Date
    Sep 2020
    Location
    vienna
    Posts
    39
    Rep Power
    15

    Re: C452 Dumpster to the Rescu(r)e!?!

    Quote Originally Posted by Synthohol View Post
    looks to me like the 2nd transfer pressure assy is broken, like only 1/2 of the transfer roller is making contact with the belt.
    thats a mouth full for a non printerguide^^
    i checked within the field manual, removed the just the 2nd transfer-roller an re-seated it. it is on the right-hand side machine upon opening the latch, the "middle" roller up on the spring-bearing bigger unit.(hopefully)
    did not look broken, it is rolling freely:-)

    picure follows as i have to leave for an customer emergency.

    thank you very much:-)

  8. #18
    Certified Konica Expert 2,500+ Posts
    C452 Dumpster to the Rescu(r)e!?!

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,941
    Rep Power
    216

    Re: C452 Dumpster to the Rescu(r)e!?!

    The roller is usually fine, it's the spring loaded post on the right side that breaks and you usually won't see it unless you lift the assy and see the while right side comes up.
    Wish I had a pic.
    It's the right side of the pressure cam. Rotate the cam and look for unusual movement and broken parts.

  9. #19
    Master Of The Obvious 10,000+ Posts
    C452 Dumpster to the Rescu(r)e!?!

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: C452 Dumpster to the Rescu(r)e!?!

    Yeah, it's not the roller itself but the mechanism that presses it against the primary transfer belt. In my experience the rear side breaks. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #20
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: C452 Dumpster to the Rescu(r)e!?!

    Quote Originally Posted by blackcat4866 View Post
    Yeah, it's not the roller itself but the mechanism that presses it against the primary transfer belt. In my experience the rear side breaks. =^..^=
    So nothing some glue can't fix?
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here