Hey guys
well i got the dev unit and installed it, all by myself Yipeee lol
Well the black definitely improved
But there's still some lines
I'm sending you what I got when i ran a test. prints test.pdf
If wanding the laser slit glasses does not help, you'll need a cyan and black drums. The test patterns help diagnosing immensely. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
yeah thanks man
and after seeing the blue lines were wondering
I'll get them thanks much
this is what i got when i ran a job on regular paper
man the colours wicked on this machine
Dropbox - WhatsApp Image 2020-10-07 at 6.08.32 PM.jpeg - Simplify your life
Do you know what might cause this?
Google Drive: Sign-in
Two blackline running through the prints. Don't think we ever had this before. Be mindful has a new IBT blade etc
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
Sorry hope these upload
It just started happening. Can't recall this ever happening before
Sent from my SM-G955F using Tapatalk
I hope that you have learnt that trying to cut corners but replacing just the black developer power & transfer blade only you causing MORE issue.
If you were using genuine only parts you don't run into all these problems.
Did you have these black lines before you replaced the black dev & transfer blade?
The paper you are using looks 'glossy' have you set the correct weight etc?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Ok let me explain how it started. We were having these faded black prints and linea and thought that the issue might of come from the cleaning blade not cleaning Bel properly. So we replaced that. Then drum then powder then replaced full developing unit.
Never had those kind of lines before.
It was one of my staff who printed that and yeah I asked her if the gsm was correctly set.
Because again never seen that on that printer. In fact Konika been pretty good. Only issues is couple jams and it's slower than the Xerox C75, and with heavy weighted stock you have to manual duplex.
I'll follow up on the GSM issue and let you know. Only genuine parts we been able to get for this machine so that's all we use.
As I said we don't have a Konika tech on Island so it's only a Canon tech who checks it. Then found great advice on here
Sent from my SM-G955F using Tapatalk
I'm going to guess that at some stage in this saga the black developer was over-toning, dumped toner in the second transfer roller unit. You can clean the second transfer roller with water, just make sure it's completely dry before re-installing.
See the repeating pattern? Is it the same length as the diameter of the second transfer roller?
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks