Results 1 to 8 of 8
  1. #1
    Junior Member
    Join Date
    Oct 2012
    Posts
    7
    Rep Power
    0

    C1100 printer C 4661 Misspass colors and Error 2

    Hi I cot a customer that got several C1100 from KonicaMinolta. One of them gives misspass print from time to time during a job. It recovers itself during the job without a code. Sometime it gives C-4661 .
    It has printing close to 10 000 000 Prints.

    Sometimes Color reg auto gives Error 2.

    Changed all the drum and developing units, Image transfer belt unit, Color reg sensor , and have cleaned the sensor that reads the speed of ITB and drum units.
    Nothing have helped so far.

    Anyone got some ideas ?

  2. #2
    Senior Tech 250+ Posts
    C1100 printer C 4661 Misspass colors and Error 2

    wjurls's Avatar
    Join Date
    Feb 2017
    Location
    Riverside, CA
    Posts
    401
    Rep Power
    29

    Re: C1100 printer C 4661 Misspass colors and Error 2

    Not sure what you mean by "misspass colors" If you mean erratic color registration, I have seen a problem with a defective high voltage board cause voltage leaking and causing very erratic behavior including mis-registered colors.

  3. #3
    Field Supervisor 500+ Posts
    C1100 printer C 4661 Misspass colors and Error 2

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    641
    Rep Power
    32

    Re: C1100 printer C 4661 Misspass colors and Error 2

    You can check the connector of the processing unit and also run the Recall Standard Data in Process Adjustment.

    Check if the rails of the processing unit are loose, causing the unit connector to not fit properly.

    You can also interrupt the adjustment and check that the charts are correctly formed in the transfer belt.

    You can also test the sensors in I / O Check mode, running 36-3 / 36-4 / 36-5 for Fr, Md and Rr, respectively.


    0 ~ 255 range
    Nothing like day after day

  4. #4
    Junior Member
    Join Date
    Oct 2012
    Posts
    7
    Rep Power
    0

    Re: C1100 printer C 4661 Misspass colors and Error 2

    This is strange. The customer got several C1100 , and several ITB unit that they swap around and serve up.
    One ITB unit give C-4661 all the time (power on), and Error 2 all the time they tried Auto reg adj.

    The next ITB unit can power on. Auto reg OK. So that one go in production.
    They print one page jobs. (They got strange jobs I know that. )

    518 sheets printed . One page at the time.

    Print 300 sheets. OK. perfect print
    Then 18 sheets with colors that are misalignment. No error code.
    Then 200 sheets perfect.

    So the machine is not ok, but is better with another ITB unit. But what can cause this ?
    Both ITB units look the same with new parts. itb belt, rollers, cleaning unit etc..

  5. #5
    Field Supervisor 500+ Posts
    C1100 printer C 4661 Misspass colors and Error 2

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    641
    Rep Power
    32

    Re: C1100 printer C 4661 Misspass colors and Error 2

    Quote Originally Posted by Norwaytech View Post
    This is strange. The customer got several C1100 , and several ITB unit that they swap around and serve up.
    One ITB unit give C-4661 all the time (power on), and Error 2 all the time they tried Auto reg adj.

    The next ITB unit can power on. Auto reg OK. So that one go in production.
    They print one page jobs. (They got strange jobs I know that. )

    518 sheets printed . One page at the time.

    Print 300 sheets. OK. perfect print
    Then 18 sheets with colors that are misalignment. No error code.
    Then 200 sheets perfect.

    So the machine is not ok, but is better with another ITB unit. But what can cause this ?
    Both ITB units look the same with new parts. itb belt, rollers, cleaning unit etc..
    The belt may be slipping on the ITB unit.
    Nothing like day after day

  6. #6
    Junior Member
    Join Date
    Oct 2012
    Posts
    7
    Rep Power
    0

    Re: C1100 printer C 4661 Misspass colors and Error 2

    Quote Originally Posted by tulintron View Post
    The belt may be slipping on the ITB unit.
    I will check that .

  7. #7
    Junior Member
    Join Date
    Oct 2012
    Posts
    7
    Rep Power
    0

    Re: C1100 printer C 4661 Misspass colors and Error 2

    I think we finally got the solution. A5AWR71700 Belt Drive. Possible the speed sensor, possible gears.

  8. #8
    Technician konicavod's Avatar
    Join Date
    Feb 2020
    Location
    Minsk
    Posts
    24
    Rep Power
    9

    Re: C1100 printer C 4661 Misspass colors and Error 2

    you need to clean Intermediate transfer belt encoder sensors.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here