Upside down on duplex

[positiveg]

C454e
No matter what settings we change now we get the second size for regular prints or booklets coming out upside down
Whether we choose long edge or short edge still the same isse.
It never used to happen now it's just happening
Any assistance?
thanks

[blackcat4866]

I'm going to guess that somebody changed the default along the way. =^..^=

[positiveg]

I'm going to guess that somebody changed the default along the way. =^..^=

But how though?

[bsm2]

To use the booklet setting document must be created as single pages.
The booklet setting will arrange them in the correct order.

If you create it as a booklet the booklet setting will screw it it up.

[Synthohol]

sounds like calendar type duplex instead of book type.
or rotate 180° setting?

[Phil B.]

be nice if you posted settings for this problem... driver and machine settings

[BillyCarpenter]

To use the booklet setting document must be created as single pages.
The booklet setting will arrange them in the correct order.

If you create it as a booklet the booklet setting will screw it it up.

I'm gonna second this.

[qbert69]

ALWAYS LET THE MACHINE/DRIVER COMBO PAGINATE FOR YOU!!! You CANNOT design a double page spread and expect it to work correctly!!!

Sent from my SM-N950U1 using Tapatalk

[positiveg]

Ok I'm printing a simple two page document from PDF.
when it flips it comes out upside down,
If i choose flip on long side or flip on short side from the PDF print dialog box it still comes out the same way.
Same thing happen if we're funning a booklet, (even single pages, as we usually have them single pages then use the booklet setting options and when it flips you'll have like back inside on the front inside and stuff like that.

On the C75 using the Fiery we know if we're printing from PDF we choose top bottom, and top top if we're printing from Word, Publisher, InDesign etc.

[BillyCarpenter]

Ok I'm printing a simple two page document from PDF.
when it flips it comes out upside down,
If i choose flip on long side or flip on short side from the PDF print dialog box it still comes out the same way.
Same thing happen if we're funning a booklet, (even single pages, as we usually have them single pages then use the booklet setting options and when it flips you'll have like back inside on the front inside and stuff like that.

On the C75 using the Fiery we know if we're printing from PDF we choose top bottom, and top top if we're printing from Word, Publisher, InDesign etc.

Is the driver or the machine controlling the process?