Change speed. C224e to C364e

**kmuserpl** · 10-22-2020

Hi.

How I can change speed in C224e to 36PPM?

Thank all for answers.

**copier tech** · 10-22-2020

Originally Posted by kmuserpl

Hi.

How I can change speed in C224e to 36PPM?

Thank all for answers.

Fit a complete set of boards from a C364e inc the SSD & HDD.

**greglogston** · 10-22-2020

Originally Posted by kmuserpl

Hi.

How I can change speed in C224e to 36PPM?

Thank all for answers.

'

This a serious question????

**BillyCarpenter** · 10-22-2020

Have to tried putting a turbo charger on it? Maybe some headers and 4 barrel carburetor? Oh wait....

**Synthohol** · 10-22-2020

the same way i can upgrade my 27" monitor to a 40" monitor.
i buy a 40" monitor.
[/snarky]
or run 6"x6" paper. that will do it too.

**copyman** · 10-23-2020

I think Kon/Min would make that really hard to do.

Heck the last time I did that was a mono Biz 200 to a Biz 350. Back than it was only only a wire change & re-programmed chip. My friend cracked the program and re-programmed the chips for the dealership he worked for. Saved the owners a lot of money. But as usual to show their appreciation they gave him a pat on the back and said good job! Not even thank you!

**slimslob** · 10-23-2020

In the early days of bond paper copiers other than Xerox, we could increase the speed of the Royal RBC I from 10 ppm to 12 ppm by changing the main motor. The machine only had a single 125 sheet paper tray so a lot of people came up with add on options. There was a rolled paper feed that attached to the left end. GradCo made a couple of sorters that could be adapted to a number of makes and models. The company I work for made a lower tray that held 2 reams of paper and a coin operation box.

**tulintron** · 10-23-2020

As our friend Copyman said, only a few threads and a small change in the programming changing the interval between pages to a smaller one. Just programming and some wires.

But I do not advise doing this to make money. This is called FRAUD.

**slimslob** · 10-23-2020

Originally Posted by tulintron

As our friend Copyman said, only a few threads and a small change in the programming changing the interval between pages to a smaller one. Just programming and some wires.

But I do not advise doing this to make money. This is called FRAUD.

If KM is anything like Ricoh you will also need a valid serial number for a C364e. After that anyone, like a competitor, who compares the serial number on oh lets say the counter printout with the serial number plate will expose your fraud.