Hi.
How I can change speed in C224e to 36PPM?
Thank all for answers.
Hi.
How I can change speed in C224e to 36PPM?
Thank all for answers.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Have to tried putting a turbo charger on it? Maybe some headers and 4 barrel carburetor? Oh wait....
the same way i can upgrade my 27" monitor to a 40" monitor.
i buy a 40" monitor.
[/snarky]
or run 6"x6" paper. that will do it too.
I think Kon/Min would make that really hard to do.
Heck the last time I did that was a mono Biz 200 to a Biz 350. Back than it was only only a wire change & re-programmed chip. My friend cracked the program and re-programmed the chips for the dealership he worked for. Saved the owners a lot of money. But as usual to show their appreciation they gave him a pat on the back and said good job! Not even thank you!
Last edited by copyman; 10-23-2020 at 03:54 AM.
In the early days of bond paper copiers other than Xerox, we could increase the speed of the Royal RBC I from 10 ppm to 12 ppm by changing the main motor. The machine only had a single 125 sheet paper tray so a lot of people came up with add on options. There was a rolled paper feed that attached to the left end. GradCo made a couple of sorters that could be adapted to a number of makes and models. The company I work for made a lower tray that held 2 reams of paper and a coin operation box.
As our friend Copyman said, only a few threads and a small change in the programming changing the interval between pages to a smaller one. Just programming and some wires.
But I do not advise doing this to make money. This is called FRAUD.
Nothing like day after day
Available.
But it is unfortunate.
I can't tell you.
Because my status indicator is red.
Bookmarks