In the manual it tells me that it is a PS57 sensor. Which is marked with a red circle. Replace it with the PS57 sensor. I was not successful, I still had the same fault, then I replaced the PS8 sensor, not having much success I still had the fault. Any ideas, any suggestions are welcome.IMG-20201115-WA0000.jpg
Enviado desde mi Infinix X656 mediante Tapatalk
Please check the ICP on the ADU board.
Sent from my SM-N960F using Tapatalk
What's up with that belt tensioner? Did you wrap in in tape to attempt to tighten the belt?
The few times that I've seen 3203 jams it was caused by a damaged fuser claw.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Goodnight. Thank you for your comment and suggestion.
Tell him to fix the paper jam code fault by replacing the M5 motor part code: 56AA 8011 2
Shown in the following pictureIMG-20201118-WA0032.jpg
Enviado desde mi Infinix X656 mediante Tapatalk
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks