Hi guys I got a bizhub c 280 not fusing black prints but everything printed on colour is fine. The black developer is ok. Drum looks fine too . The black toner rubs of easily.and their is no developer on paper
Anyone seen this
Hi guys I got a bizhub c 280 not fusing black prints but everything printed on colour is fine. The black developer is ok. Drum looks fine too . The black toner rubs of easily.and their is no developer on paper
Anyone seen this
Black non OEM toner refill being cr.p?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
many points of info are missing here:
OEM toner/dev?
what are the page counts on PM parts?
you mentioned GHOSTING .. that can be due to a worn out fuser
what are the density settings?
toner rubbing off is usually due to: bad fuser... high density settings.
can you upload PDF'S of the defects?
Phil B. ' The Dentist '
Bookmarks