Restart 454e

[uzi mana]

HII
i have two machines 454e and thay Restart several times and then rising When I turn off power completely and turn it on again they repeat the startup several times and then stabilize without a problem What needs to be done for a machine to stop booting?

[Gift]

Probably it's a faulty ssd board or hdd issue.

[copier tech]

HII
i have two machines 454e and thay Restart several times and then rising When I turn off power completely and turn it on again they repeat the startup several times and then stabilize without a problem What needs to be done for a machine to stop booting?

If the machine comes to ready after you power off & on its not the SSD.

Check the error history most likely C-2557 etc errors logged.

[uzi mana]

Probably it's a faulty ssd board or hdd issue.

I replaced and did not help

[copier tech]

I replaced and did not help

Did you check to see is any errors are in the history?

[Gift]

I replaced and did not help

Both? OK, try and see if the error comes up if the network cable is unplugged.

Another thing what comes in my mind is the PSU. Does the machine collapse right in the moment when the print engine starts it's idle-initialisation run?
You can try and start the machine with an open door to see what happens without the additional load from fuser, maindrive, fan etc.

[uzi mana]

[QUOTE=Gift;1636399]Both? OK, try and see if the error comes up if the network cable is unplugged.

Another thing what comes in my mind is the PSU. Does the machine collapse right in the moment when the print engine starts it's idle-initialisation run?
You can try and start the machine with an open door to see what happens without the additional load from fuser, maindrive, fan etc.[/


i did and did not helpThe machine is not connected to the networkOnly copy

After she finishes doing a restartIt works without a problem and also prints

[uzi mana]

Did you check to see is any errors are in the history?

no eror

[Bix]

Hi, sure they're not connected to a faulty power strip? They have maximum power parameters. Is there a UPS? Is the ethernet cable powered?

[uzi mana]

Hi, sure they're not connected to a faulty power strip? They have maximum power parameters. Is there a UPS? Is the ethernet cable powered?

no ups and I took them to my lab