Originally Posted by
emujo2
You've been given every suggestion under the sun..here's another.!! Next time try printing on the KM device before you sell it..The file is probably being sent as PS..You can try the KM PS driver, but Km does not support true PS printing (except for the Fiery), it uses PS emulation. The other vendors you mention both support true PS out of the box. KM won't play ball with Microsoft so they won't bless their PS drivers..If you don't care about stapling or duplexing you might try a generic HP driver just for these CAD jobs, but the other suggestions about converting it to a flat file are better..You can't "fix" this..You screwed up by not doing your homework..posting 100 times for "more suggestions please" is just gonna start making every one skip your thread. E
Bookmarks