Any compatibility between bizhub c454e and bizhub c554e fuser?

[ammorex112]

hello!
i have a bizhub c554e with a fuser related error. didn't work with trouble reset, by phone.
the copier machine is at about 250 km from my office, so i have to go there, but i do not have a c554e fuser.
i only have at this moment a bizhub c454e fuser.
until now i did not try to swap a c454e fuser to a c554e machine.
are they compatible? need to change connector or something ?
thank you!

[BillyCarpenter]

Nope, won't work. The C454e is only compatible with the C454. The C554e fuser will only work in that model. At least according to Precision Roller.


Konica Minolta bizhub C454e Fuser (Fixing) Unit- 120 Volt, Genuine (F0154)

[3ktlc]

They are not compatible.

[allan]

This mistake of ordering or giving the tech the wrong fuser is super common.

[copier tech]

hello!
i have a bizhub c554e with a fuser related error. didn't work with trouble reset, by phone.
the copier machine is at about 250 km from my office, so i have to go there, but i do not have a c554e fuser.
i only have at this moment a bizhub c454e fuser.
until now i did not try to swap a c454e fuser to a c554e machine.
are they compatible? need to change connector or something ?
thank you!

What is the error? most likely you just have a piece of paper wrapped around the fuser.

[ammorex112]

ok. thank you all ! good to know about this compatibility.

[EarthKmTech]

554 type is induction if i remember correctly so the whole rear side of the fuser is open for the coil to come close to the heating roller, the 454 series is the old fashioned lamp style with a closed back.

Never see them anymore so cant remember.