Misaligned Page in ADU (Duplex) on C8000

[tsbservice]

Found something maybe similar:
Konica Minolta C6000 with J-9451 can't duplex

[adkw]

Any clutches in ADU? You may want look at them if any.

The clutches appear to connect to the main body and not to the ADU portion of it. It rollers are above the ADU unit. Clutches seem to be spinning without much resistance and no grinding.

[adkw]

What about the fuser and inverter/exit assembly? A page skewed in the fuser may not identify a jam until further down the paper path. =^..^=

I tried cleaning the conveyance roller and I was able to print around 10 pages prior to another jam (furthest I've gotten in awhile). The rollers feel a bit smooth and worn out. Going to replace this and the pressure roller on the exit assembly and see if that does the trick.