Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician
    Join Date
    Dec 2019
    Location
    Sindh
    Posts
    16
    Rep Power
    3

    Konica Bizhub 600 Network Not Working To Pc

    Konica Bizhub 600 Network Not Working To Pc


  2. #2
    Service Manager 1,000+ Posts
    Konica Bizhub 600 Network Not Working To Pc


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,235
    Rep Power
    39

    Re: Konica Bizhub 600 Network Not Working To Pc

    assuming you can ping the copier or access copiers web page

    just click "The printer I want isnt listed"

    then add a printer using ip address

  3. #3
    Senior Tech 100+ Posts
    Konica Bizhub 600 Network Not Working To Pc

    wjurls's Avatar
    Join Date
    Feb 2017
    Location
    Riverside, CA
    Posts
    144
    Rep Power
    14

    Re: Konica Bizhub 600 Network Not Working To Pc

    To install a 600 print driver you want to use the "add printer" method and manually enter the IP address and use the .inf file.

  4. #4
    service technician
    Join Date
    Feb 2018
    Location
    Kankakee, ill
    Posts
    43
    Rep Power
    6

    Re: Konica Bizhub 600 Network Not Working To Pc

    the 600 needed the ic202 image controller to print if it is not there or damaged, maybe why you can't print.

  5. #5
    Service Manager 2,500+ Posts
    Konica Bizhub 600 Network Not Working To Pc


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    2,529
    Rep Power
    89

    Re: Konica Bizhub 600 Network Not Working To Pc

    Are you sure it has the printer chip installed for printing?

    Print configuration page and it will show if installed

  6. #6
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    13,295
    Rep Power
    339

    Re: Konica Bizhub 600 Network Not Working To Pc

    I noticed that one of the LEDs next to the network connector was blinking rapidly. Jabber like that could means that the connection is being hammered. It could be the network interface in the Bizhub or it could be the switch/hub/router that it is connected to. Try connecting directly to your laptop. If you still get jabber it is most likely the Bizhub

  7. #7
    Technician
    Join Date
    Dec 2019
    Location
    Sindh
    Posts
    16
    Rep Power
    3

    Re: Konica Bizhub 600 Network Not Working To Pc

    Quote Originally Posted by K-3 View Post
    the 600 needed the ic202 image controller to print if it is not there or damaged, maybe why you can't print.
    s-l400.jpg

    I tried to replace this this card from working machine but no luck

  8. #8
    Field Supervisor 500+ Posts
    Join Date
    Mar 2017
    Posts
    790
    Rep Power
    32

    Re: Konica Bizhub 600 Network Not Working To Pc

    The IC 602 was a 8 pin EEPROM looking device..I'm not sure what you are showing...Out of the box it was a copier/scanner..No printing without the IC..E

  9. #9
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,359
    Rep Power
    95

    Re: Konica Bizhub 600 Network Not Working To Pc

    Quote Originally Posted by manzoorwighio View Post
    s-l400.jpg

    I tried to replace this this card from working machine but no luck
    Looks like IROM if there is a battery on the back its the NVRAM. I would suggest putting back the original one.
    Whatever

  10. #10
    Field Supervisor 500+ Posts
    Join Date
    Mar 2017
    Posts
    790
    Rep Power
    32

    Re: Konica Bizhub 600 Network Not Working To Pc

    After watching the video again...This is a pretty old machine..If the network card is configured to auto negotiate, it may never connect to a 1gb port.try setting the port to 100 full duplex. If this is a DHCP environment try restarting in DHCP and see if you can pull an address. Another thing would be to go into Admin and turn OFF TCP/IP , cycle power, then turn TCP/IP on. this is like a NIC reset. Also..someone refresh me..did the 600 need a x-over to connect directly back to a laptop? E

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here