A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Look at the bottom of the ribbon cable for wear.
Been scraping of the isolation and soldering the tracks.
Then there could be discoloration on the reference patch.
Also I use to lift the front of the scanner rails with shims to bring the scanner closer to the glass with about 1mm that helped a lot.
Would recommend trying that. Shim it with paper on the far side its got a shaft and the near side an angle rail. Just raise that a little.
Forgot about that.
Lucky i don't have to struggle with these machines any more.
Sure they should have released firmware by now that will stop the lamp from running all the time...
Whatever
Bookmarks