Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    235
    Rep Power
    31

    c3350i - C3320 vending question

    I do not have access to this machine but a customer has asked me a question. Basically when the copier is in vendor 2 mode with scanning is set so that it is not controlled by the vendor, can scanning be accessed while the "Insert Funds" screen is up.

    If someone has access to one they could check pretty quickly.
    Enter service modes and hit stop 9
    Under Management Function Choice, set vendor 2 and exit.
    Screen will say power on vend device.
    Go into admin, security, Function management settings, usage settings for each function and set data to no or off.
    Exit admin mode.
    Can scanning be used even though the screen says to power on vendor?

    I'm pretty sure it can but the customer has asked that I confirm this. Not something I normally need to do but . . . .

    Thanks in advance

    The subject should be c3350i - C3320i vending question
    Jamex Tech Support: Saving the world one phone call at a time.

  2. #2
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    235
    Rep Power
    31

    Re: c3350i - C3320 vending question

    A co worker said I should have mentioned that you don't need a vend station attached to test this. I didn't think I needed to but it gives me a reason to bump this.
    Jamex Tech Support: Saving the world one phone call at a time.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    May 2017
    Posts
    61
    Rep Power
    8

    Re: c3350i - C3320 vending question

    Yes, this is possible. I have a few accounts set up exactly like this. Usually you just set up one of the hard keys under the panel to go straight to Scan/Fax screen, or hit Menu then Scan/Fax.

  4. #4
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    235
    Rep Power
    31

    Re: c3350i - C3320 vending question

    I let the customer know.

    Thanks for the reply!
    Jamex Tech Support: Saving the world one phone call at a time.

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Mar 2017
    Posts
    774
    Rep Power
    32

    Re: c3350i - C3320 vending question

    there is another setting in Servcie mode you should be aware of..Allow setting of next **** job..If this is not on, that 250 page print job will need to be compete before any other scan jobs can even start. E

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here