Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
you are not a true user if you don't fuck up the machine for the tech to fix
I also had this case.
I'm glad I can tell you.
The bizhub C308 or bizhub 287 models
You cannot use firmware with SenDisk.
You can use third-party 8G or 16G to work with firmware.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
I've never seen anything like this mentioned for KM, nor have I ever had an issue updating with the network cable plugged in. I do know that when I worked on Ricoh/Savin lines, it was a requirement, and they pushed it hard in training. If anything came over that network cable during the update, it would cause you some major headaches that you really didn't want to experience.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks