Thanks: 
Likes: No idea how this is relevant to this post regarding a squeak?Originally Posted by hquang
Dislikes: 0
No idea how this is relevant to this post regarding a squeak?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Can you be more specific - I don't get where are the covers?the latch pins get in the way.
take off the covers and unscrew the pin that most annoys you
A copier squeak can be very tricky to track down even for an experienced tech.
Plus it is IMPOSSIBLE to troubleshoot a squeak on a chat forum.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Sorry I thought it related to 'general maintenance'. Should it be deleted now ?
+1
Not to be critical, but I don't see why the document feeder tray needs to be removed.
My recommendation is to leave the DF tray on, and clean the rubber rollers. This probably does not have anything to do with your squeak.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
If you are aiming for the fuser move down a little.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I did clean up the rollers and install back - just tested and the squeak's gone. Thanks rrrohan!
My second issue is to clean the DF tray and around since it's dusty and the Dust Off spray does not help. That's why I want to remove it so I can clean it separate from the printer.
Yes it have nothing to do with the squeak, which is fixed!
The squeaks have gone rrrohan, Thank you!
The reason that I'm discouraging you is that there is a wiring harness that runs through the real swivel post, through a series of looms to the DF controller. And as anal as I am, I have never removed a DF tray because of dust.
Just wipe it off and be happy.
You cannot submerge it. There are electronics inside. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
use an organic cleaner.. leave the tray in place... spray lightly don't soak it down.. E.O.S.
Reply With Quote
Bookmarks