Dislikes: 0
There is one screw hidden under part 1Originally Posted by hquang
Hinge part 1. I'll see it. If you want to left part 1 further just flex it past the rear cover.
But I wouldn't remove it, you can easily clean it left installed
Sent from my Pixel 4 XL using Tapatalk
konica2.jpg
End-user now but still shown Technician!
Hoorah rrrohan,
Thanks to your instruction I've lifted part 1, removed and cleaned part 2.
The only tricky part is putting it back since the screws holes are in deeper level.
Again thanks,
I think you need to work on one particular skill:
Taking advice.
Five different people tell you that it's entirely unnecessary, and that you can cause yourself additional heartache by doing so, but you didn't listen.
I can understand being stubborn. I'm fairly stubborn myself, but when (5) different people tell me something I have to consider: "Is this a good idea?" These people probably know more than me.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
LOLI'm fairly stubborn myself
That's what your wife says, Cat?
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
She doesn't phrase it quite that way ... but yes. =^..^=LOL
That's what your wife says, Cat?
Hans
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
DON'T worry about that, he just bully on you, and should be something wrong when he copy and paste.
DON'T give up, just take eazi, you will have it done bc U r VNse
I get it done. It's quite easy and simple with good instruction from rrrohan.
Congratulations on a job well done. If I can offer you a little advice for the future....
I'm an experienced tech and one day someone is gonna tell you not to take something off and you're gonna do it anyway and find yourself in a world of hurt. We've all been there.
I know you haven't been around long and don't know who to trust but blackcat warned you against removing the doc. feeder tray. If he tells me not to do something...I flat-out ain't gonna take if off come hell or high water.
He was trying to help you. I hope you know that.
It worked out for you this time. Congrats.
Hi Billy,
Thank you and I am actually very much appreciated all the advises from ALL. I do understand that ALL want to help me to avoid non necessary troubles. When not taking advice, I never mean to look down to that advice but to put myself to a challenge I think it's not big, and yes this challenge is not big at all. I don't mind being call stubborn!
I've been to this group less than a week but it helps me so far solving three problems: Tray 2 did not see the paper size, the squeaky noise and removing the DF tray. Since I am not a technician I just need a clear instruction how to get it done and if that instruction does not sound impossible I like to try it. When thing is assembled, there must be a way to disassemble it.
Again thanks for all the advises.
^-|-^
Thanks: 
Likes: 
Reply With Quote
Bookmarks