Dislikes: 0
I have seen Dual Scan ADFs that are very resistant to jams. But I have some printers with jams around (66-13).
I have difficulty getting to the sensors in these ADFs. In normal DFs, it is sufficient to remove many screws but it is easy to get to the sensors. On ADF Dual Scan the covers blocked access to that area.
What technique do you use to get into those sensors quickly?
For now, I've never needed to disassemble. But if I remember correctly, you have to disassemble the two side covers to remove the one under the rollers.
Check service manual for 'remove the lower guide assy'.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
An air can does the job.
No need to rip apart.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Thanks: 
Likes: 
Reply With Quote
Bookmarks