Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27
  1. #11
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,427
    Rep Power
    33

    Re: Reboot Olivetti d-Color MF282plus

    Hi, I proceeded like this:
    - Replaced SSD but keeps restarting.
    - Removed options but keeps restarting.
    - RAM removed: MFP stops restarting but nothing comes out on the display. Startup noise only.
    - RAM replaced unsuccessfully.


    At this point I am thinking of a broken MFPB. Some idea?

  2. #12
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,041
    Rep Power
    51

    Re: Reboot Olivetti d-Color MF282plus

    if you think it's a 284e how many "fins" pop up before it re boots..and have you tried doing a trouble reset to get to the point where you can enter service mode to check what the error is?

  3. #13
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,427
    Rep Power
    33

    Re: Reboot Olivetti d-Color MF282plus

    Quote Originally Posted by emujo2 View Post
    if you think it's a 284e how many "fins" pop up before it re boots..and have you tried doing a trouble reset to get to the point where you can enter service mode to check what the error is?
    The printer fails to turn on, so no errors displayed.
    At this point I think PSU or motherboard defective.

  4. #14
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,041
    Rep Power
    51

    Re: Reboot Olivetti d-Color MF282plus

    Your OP says re-booting..in most cases the re boot occurs after the LCD shows something..Number of fins coming up can help in troubleshooting..So you are saying you power it on and it cycles on/off at this point? E

  5. #15
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,206
    Rep Power
    190

    Re: Reboot Olivetti d-Color MF282plus

    Quote Originally Posted by Bix View Post
    Hi, I have a client with an Olivetti D-color 282Plus.
    The printer keeps restarting every 2-3 seconds. Looks like a bizhub C284e to me. In all likelihood, the SSD no longer works. I tried to detach DF and HDD. Do you think I can insert a new Bizhub C284e SSD?
    Quote Originally Posted by emujo2 View Post
    Your OP says re-booting..in most cases the re boot occurs after the LCD shows something..Number of fins coming up can help in troubleshooting..So you are saying you power it on and it cycles on/off at this point? E
    2-3 seconds are not enough to see anything meaningful Ed.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  6. #16
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Posts
    197
    Rep Power
    19

    Re: Reboot Olivetti d-Color MF282plus

    Quote Originally Posted by tsbservice View Post
    2-3 seconds are not enough to see anything meaningful Ed.
    Was it possible to load a firmware after replacement? Try reseat SSD.

  7. #17
    Senior Tech 100+ Posts
    Reboot Olivetti d-Color MF282plus


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    104
    Rep Power
    3

    Re: Reboot Olivetti d-Color MF282plus

    Quote Originally Posted by Bix View Post
    I have ordered a new SSDB.
    I will be using the firmware of a bizhub C284e. I believe that "plus" corresponds to the "e" series.
    I will let you know
    Yes, it's the C284e.

  8. #18
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,427
    Rep Power
    33

    Re: Reboot Olivetti d-Color MF282plus

    Quote Originally Posted by occus View Post
    Was it possible to load a firmware after replacement? Try reseat SSD.
    Hi, the printer can only stay on for 2 seconds, so:
    - Unable to log in in service mode.
    - Reset tool does not have time to start.
    - Failed to update firmware.


    Thank you!

  9. #19
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Posts
    197
    Rep Power
    19

    Re: Reboot Olivetti d-Color MF282plus

    07-SSD-Firmware-Ver6.05m info.pdf
    TNEU1400013EN_SSD board trouble shooting 1.1[1].pdf

    Bix, do you have a new SSD with green Dot? (with 6.05 already installed?)
    Have a look in the troubleshooting guide.

    If you can't install the firmware i think it is not possible to boot a new ssd up.
    Once i forgot the firmware after replacing the ssd the device always had a bootloop.

    And check your firmware in Knova. Are the generic brands, (olivetti D-Color, Develop ineo) listed in the compatibility list?

  10. #20
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,427
    Rep Power
    33

    Re: Reboot Olivetti d-Color MF282plus

    Hello occus, thank you for your reply.

    in germany we are having logistical problems due to bad weather and the parts are arriving late. I have ordered a new SSD which is yet to arrive
    For now I have taken a used SSD to make it stop rebooting. But I have seen that the solution is not effective. The printer keeps restarting anyway.
    Firmware is also unknown. I wanted to try a Konica Minolta firmware because there seems to be no Olivetti firmware on Knova.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here