I did exactly as you say (i guess so), firstly did with a reset tool ->then one of the fresh firmwares that I had (GDC-M1) and after couple reboots i did "restore data" -> but no success because it started restoring data and it was cycling/nonstop loop for about 1 hour and nothing happened. I've read other threads similar to this where people say if it loops for a long time means something is wrong. Maybe I didn't wait long enough and should give it more time? Or I've missed that train already?
Maybe as some people say i must find those GHV firmware that can solve this.
You may be right sir, but 1 hour isn't long enough?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
I did all steps as it says in attached procedure.
Tried that again without updating firmware, just with reset tool. Everything same, stuck on that screen already for and hour "The data is being processed. Please wait" (attached picture)
loop.jpg
Last edited by Sanker; 02-05-2021 at 09:45 AM.
Looking for GHV-M1 firmware. I will be very grateful if somebody could send it to me. My last hope on solving this error. If it won't help, then i guess will have to replace MFPB and SSD
Check your pm.
Please contact me by my email.
canonrp@naver.com
I recover this and get paid.
But I wish you were happy.
I'll help you with no pay.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
One kind person has sent me a firmwave, so if I will be able to fix that bizhub this thread will be updated so everybody would see if it helps.
Since nobody has pointed it out, when you zap the SSD board you MUST enter the correct machine and type from the selection of the firmware stick or no firmware can be installed.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks