Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,038
    Rep Power
    51

    Re: Bizhub only scanning to TIFF

    Quote Originally Posted by femaster View Post
    He's talking a Bizhub 200 here, no such menus or settings existed for at least another 2 to 3 years after the 200 was produced....

    Well you may be correct..I guess the info direct from KM itself is wrong..


    ID: KBA00902518
    Related Products:bizhub 200,bizhub 222,bizhub 250,bizhub 282,bizhub 350,bizhub 362
    Related Options:


    Question
    How to default the scan file type to PDF.

  2. #12
    Junior Member
    Join Date
    Feb 2021
    Location
    Montreal
    Posts
    4
    Rep Power
    0

    Re: Bizhub only scanning to TIFF

    Quote Originally Posted by emujo2 View Post
    Found this on one of my old "paper brains"

    To default the scan file type to PDF, perform the following:
    1. Press the Utility/Counter button.
    2. Select Check Details.
    3. Enter the Service Mode
    4. Enter the Service passcode and press End.
    5. Select Soft Switch Settings.
    6. Select Mode Selection and enter mode 360.
    7. Select Bit Selection and scroll to Bit 0 and change the value to 1.
    8. Press Set.
    9. Cycle machine main power switch OFF/ON.
    confirmed this is accurate in the service manual... tried it.. still e-mailing TIF

  3. #13
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,038
    Rep Power
    51

    Re: Bizhub only scanning to TIFF

    Quote Originally Posted by Payyyy View Post
    confirmed this is accurate in the service manual... tried it.. still e-mailing TIF
    This is a pretty old machine..I have nothing to test with...Any chance the original one touches keep their settings but any new OneTouch would be defaulted to PDF? E

  4. #14
    Junior Member
    Join Date
    Feb 2021
    Location
    Montreal
    Posts
    4
    Rep Power
    0

    Re: Bizhub only scanning to TIFF

    Quote Originally Posted by emujo2 View Post
    This is a pretty old machine..I have nothing to test with...Any chance the original one touches keep their settings but any new OneTouch would be defaulted to PDF? E

    oh no that was it haha feeling really silly right now . Thanks!

  5. #15
    Service Manager 500+ Posts femaster's Avatar
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    551
    Rep Power
    34

    Re: Bizhub only scanning to TIFF

    Quote Originally Posted by emujo2 View Post
    Well you may be correct..I guess the info direct from KM itself is wrong..

    ID: KBA00902518
    Related Products:bizhub 200,bizhub 222,bizhub 250,bizhub 282,bizhub 350,bizhub 362
    Related Options:

    Question
    How to default the scan file type to PDF.
    The info in the KB you have indicated is correct:
    1. Press the Utility/Counter button.
    2. Select Check Details.
    3. Enter the Service Mode.
    4. Enter the Service passcode and press End.
    5. Etc...

    I never stated that the method in your post was wrong. If you look back at my post, you will see that I quoted the incorrect method from another post, not yours. The info I originally quoted and replied to is wrong:
    "Choose the settings you like in scan mode then go into system settings->user settings->scan settings ->set current as default."

    That method works perfectly fine on newer models, but on the 200, there was no such menus or settings.
    Ricoh Service Tech for 7 year. Currently a Konica Minolta Service Tech for the last 7 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

  6. #16
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,038
    Rep Power
    51

    Re: Bizhub only scanning to TIFF

    Quote Originally Posted by femaster View Post
    The info in the KB you have indicated is correct:
    1. Press the Utility/Counter button.
    2. Select Check Details.
    3. Enter the Service Mode.
    4. Enter the Service passcode and press End.
    5. Etc...

    I never stated that the method in your post was wrong. If you look back at my post, you will see that I quoted the incorrect method from another post, not yours. The info I originally quoted and replied to is wrong:
    "Choose the settings you like in scan mode then go into system settings->user settings->scan settings ->set current as default."

    That method works perfectly fine on newer models, but on the 200, there was no such menus or settings.

    Understood..E

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here