Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Trusted Tech 50+ Posts
    Bizhub C227 developer spew


    Join Date
    Feb 2021
    Location
    Murcia
    Posts
    82
    Rep Power
    0

    Bizhub C227 developer spew

    Hello, I have a problem with a c227, after changing the drum and sheet of unit M, the developer comes out of the unit and produces the error P-7, I have tried the following:


    -switch drum units from M to Y, developer M no longer jumps but now Y jumps.


    -New drum and cleaning belt change with reset chip, now the unit has 100% useful life


    -I have checked the continuity of the crown and drum pins and it is correct.


    - the drum generates the image but the developer continues to skip


    I add some images

    WhatsApp Image 2021-02-12 at 19.18.13 (1).jpgWhatsApp Image 2021-02-12 at 19.18.13.jpgWhatsApp Image 2021-02-12 at 19.18.14 (1).jpgWhatsApp Image 2021-02-12 at 19.18.14.jpg

  2. #2
    Senior Tech 250+ Posts
    Bizhub C227 developer spew


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    271
    Rep Power
    9

    Re: Bizhub C227 developer spew

    Is "Level History 1" ok?

  3. #3
    Trusted Tech 50+ Posts
    Bizhub C227 developer spew


    Join Date
    Feb 2021
    Location
    Murcia
    Posts
    82
    Rep Power
    0

    Re: Bizhub C227 developer spew

    Quote Originally Posted by CP-1015 View Post
    Is "Level History 1" ok?
    no, it went into service mode with the door open to avoid the spew and when I close the port it goes above 7% in a few seconds until it gives the error, it only happens with that drum unit

  4. #4
    Senior Tech 250+ Posts
    Bizhub C227 developer spew


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    271
    Rep Power
    9

    Re: Bizhub C227 developer spew

    I think the chip is defektiv. Sometimes chip is in wrong posistion in plastic holder, too.
    Last edited by CP-1015; 02-13-2021 at 10:09 AM.

  5. #5
    Trusted Tech 50+ Posts
    Bizhub C227 developer spew


    Join Date
    Feb 2021
    Location
    Murcia
    Posts
    82
    Rep Power
    0

    Re: Bizhub C227 developer spew

    Quote Originally Posted by CP-1015 View Post
    I think the chip is defektiv. Sometimes chip is in wrong posistion in plastic holder, too.
    In c227 the chip have cable and I check the conexions and I try whit other chip

  6. #6
    Senior Tech 250+ Posts
    Bizhub C227 developer spew


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    271
    Rep Power
    9

    Re: Bizhub C227 developer spew

    My experience only a new chip helps - nothing else.

  7. #7
    Service Manager 5,000+ Posts
    Bizhub C227 developer spew

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,561
    Rep Power
    182

    Re: Bizhub C227 developer spew

    Quote Originally Posted by L0rdC View Post
    Hello, I have a problem with a c227, after changing the drum and sheet of unit M, the developer comes out of the unit and produces the error P-7, I have tried the following:


    -switch drum units from M to Y, developer M no longer jumps but now Y jumps.


    -New drum and cleaning belt change with reset chip, now the unit has 100% useful life


    -I have checked the continuity of the crown and drum pins and it is correct.


    - the drum generates the image but the developer continues to skip


    I add some images

    WhatsApp Image 2021-02-12 at 19.18.13 (1).jpgWhatsApp Image 2021-02-12 at 19.18.13.jpgWhatsApp Image 2021-02-12 at 19.18.14 (1).jpgWhatsApp Image 2021-02-12 at 19.18.14.jpg
    How did you switch the drum between colours the drum & dev are one complete unit!?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #8
    Senior Tech 250+ Posts
    Bizhub C227 developer spew


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    271
    Rep Power
    9

    Re: Bizhub C227 developer spew

    Black have a separate unit for drum and developer. Color units not.

  9. #9
    Service Manager 5,000+ Posts
    Bizhub C227 developer spew

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,561
    Rep Power
    182

    Re: Bizhub C227 developer spew

    Quote Originally Posted by CP-1015 View Post
    Black have a separate unit for drum and developer. Color units not.

    Yes, but his issue is with magenta, hence my question how did he swap the 2 colour drums round.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  10. #10
    Trusted Tech 50+ Posts
    Bizhub C227 developer spew


    Join Date
    Feb 2021
    Location
    Murcia
    Posts
    82
    Rep Power
    0

    Re: Bizhub C227 developer spew

    Quote Originally Posted by copier tech View Post
    How did you switch the drum between colours the drum & dev are one complete unit!?
    units are unit with one screw and two springs, they are easy to separate

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here